7 Meg-mo Mower Blades Problems and Solutions

Meg mo Mower Blades Problems

The Meg-Mo mower blades are not your typical traditional blades, both in design and material. The manufacturers have included a round disk with 4 short blades attached to the edge.

During operation, the center hub rotates and generates a centrifugal force. The four blades swivel, cutting every grass in its path.

Despite being a futuristic tool made from superior and non-traditional materials, the Meg-Mo blades are sometimes prone to trouble.

Below, we have discussed most of the Meg mo Mower blades problems and quick solutions.

Related Posts

7 Meg mo Mower Blades Problems

1. Blade Balancing Difficulty

When the center plate rotates, each of the four blades swivels and cuts the grass. Sometimes, the blade may encounter foreign objects like roots or rocks.

When the blades hit such objects, they may tilt to one side and lose their balance. Even without hitting foreign objects, after prolonged use, sometimes the blades are off balance.

This is because debris may get stuck in between the connecting point of the blade and the plate restricting the movement of the blades. This mostly results in inconsistent cuts on the lawn.


Ensure the four blades balance properly on the plate before installing the disk on your mower. You should also ensure that the connections between the plates and the blades are debris free.

The debris prevents the blades from swinging or bends the blades towards one side. This is how debris creates a blade balancing difficulty.

You should clean your blade connections and ensure they are swinging freely.

Read: Are lawn mower blade nuts reverse threaded?

2. Uneven Cuts

Sometimes, the Meg-Mo blades don’t deliver consistent cuts on the lawn, especially if you have a lawn terrain with multiple types of grass.

Certainly, when mowing taller grass, the cut is very inconsistent. Users have figured out that you have to mow the same patch twice or more to achieve a clean cut.

As you can imagine, that can be quite time-consuming and exhausting. Some users also complain that the Meg-Mo blade produces fine clippings, which easily mulch the ground.

When you leave grass clippings on the ground over time, they prevent a clean-cut.


The first solution is avoiding uneven fields when using the Meg-Mo blades. This is because they suit to cut one terrain at a time.

Second, check and ensure that the blades fit properly and balance before you start mowing your lawn.

It’s also important to follow the instructions on the manual or contact the manufacturer for any clarification when installing your Meg-Mo mower blades.

Also, check out your lawn terrain. If the grass is tall, consider changing your blades because some Meg-Mo blades will not mow tall grass evenly.

Alternatively, contact the manufacturer and ask for blades suited for taller grass.

For those seeking more solutions related to mowers leaving strips of grass, check out our article.

3. Additional Blade Load Compared to Traditional Blades

This is a discussion starter in many blade forums where users highlight the differences between various brands’ blades.

While you might never encounter bent blades, the Meg-Mo may be too heavy for your machine because the center disc is pure solid metal.

Some customers complain that the heavy disc causes the engine to be noisier and to produce more heat during operation.


It’s a good idea to contact the Meg-Mo experts before you install the blades. They will tell you what you need to adjust during installation to avoid this issue.

You might require extra support for the blades depending on the model of your utility vehicle.

4. Meg-Mo Blades Require Additional Equipment

Since the Meg-Mo technology does not manufacture typical blades, you might need to customize your deck. This is because the Meg-Mo blades are bigger and may not fit in your deck.

Beyond the size of the deck, the weight of the blade may require extra support, especially if you are running a low horsepower vehicle.

This might cost you extra money, but it is worth the efficiency it comes with.


To solve this issue, you will need to invest extra money in balancing equipment and additional mounting hardware.

This adds to the cost of the blades. Unfortunately, small retailers do not stock this, you might need to order directly from the manufacturer.

5. Ultra-Fine Dust from Carbide Blade

Meg-Mo blades are made with ultra-fine carbide teeth, making them extremely efficient when cutting through tough materials.

This cutting power does come with a downside, however; as the blade wears out during operation, it releases a cloud of very fine dust particles into the air.

This dust can be potentially hazardous to your health and cause respiratory problems for those working nearby.


You must put a good filtration system in place to prevent harm to your working area and yourself. This is almost impossible on a normal deck that will discharge clippings.

6. Prolonged Use is Damaging to the Blade and other Parts

The downward weight of the Meg-Mo blade is enough to bend the machine’s frame and you might incur extra maintenance costs.

With this weight, the machine is also likely to sustain damage too.


Ensure you have balanced the blades when installing them per the owner’s handbook. Check the blades to see if they fit properly on the central disc.

If anything keeps them from moving freely, make sure you have it corrected. Inquire from the manufacturer about what extra hardware you might need to install the blades on your specific machine model.

7. Meg-Mo Blades are Expensive

Meg-Mo blades are one of the high-end cutting tools. A single blade will cost a little more than standard blades.

This is not an issue that bugs most users; it only becomes problematic if the price does not match the blades’ ability to give a clean cut and last as long as it should.

You may need to change your Meg-Mo blade depending on your working terrain, unlike other multipurpose blades.

With Meg-Mo mower blades, mowing on different terrains means different blades, which means more costs on equipment.

Another reason meg mo are expensive is that you might need extra customization for the blade to work on a specific machine.

Therefore, if you have mounted the blades on a particular mower, you may not use it on another machine.

Even though you might not experience bent blades, or require frequent sharpening, once the blades are dull, you will need to replace them.


Unfortunately, there’s not one clear-cut solution to this problem. It’s up to you to weigh the mowing efficiency advantages against the cost of buying the blades.

If you love the perfection Meg-Mo blades give and don’t mind digging deeper into your pocket, invest in the blades.

Meg mower blades problems and troubleshooting guide

Blade Balancing DifficultyDebris getting stuck between the blade and the plate, causing restrictions in movement and off-balance blades– Ensure proper balance of the blades before installation
– Clean debris from blade connections
– Ensure free swinging of the blades
Uneven CutsUnsuitability for cutting multiple types of grass or taller grass– Avoid mowing uneven fields
– Ensure proper blade fit and balance
– Follow the manufacturer’s instructions
– Consider using blades suited for taller grass
Additional Blade Load Compared to Traditional BladesHeavy solid metal center disc causing increased noise and heat during operation– Seek advice from Meg-Mo experts before installation
– Consider additional support for the blades depending on vehicle model
Meg-Mo Blades Require Additional EquipmentBigger size of the blades and their weight requiring deck customization and extra support– Invest in balancing equipment and additional mounting hardware
– Order directly from the manufacturer if necessary
Ultra-Fine Dust from Carbide BladeRelease of fine dust particles during operation– Implement a good filtration system to prevent harm
– Difficult on a normal deck that discharges clippings
Prolonged Use is Damaging to the Blade and other PartsWeight of the blades bending the machine’s frame and causing damage– Ensure proper balancing and fitting of the blades
– Correct any restrictions on blade movement
– Inquire about additional hardware for installation from the manufacturer
Meg-Mo Blades are ExpensiveHigh cost compared to standard blades and the need for different blades for different terrains– Weigh the advantages of mowing efficiency against the cost of the blades
– Consider the need for customization for specific machines
– Determine the value of perfection provided by Meg-Mo blades and decide on investment accordingly

Meg-Mo Blade Review

Meg-Mo blades cut cleanly and are an incredible technology made from harder steel. You’ll notice the difference in cutting efficiency when you mow with them.

The cutting points on the rotary design get a lot more work done. Whenever you hit an object, the blades get out of the way—the object does not fly far away.

This significantly reduces accidents during operation. The Meg-Mo blades are easier to sharpen (does not require a grinder) and do not produce heat.

Without frequent sharpening, their edge remains sharp for considerably longer compared to traditional blades. You get longer cutting hours with less frequent sharpening.

Before you spring into the Meg-Mo system bandwagon, you need to be cautious of the extra customization and maintenance required for them to work on your lawn mower.

This alone makes it hard to use it across different lawn mowers.

Meg mo blades Maintenance Tips

  1. Regular Cleaning: After each use, clean the blades thoroughly to remove any grass clippings, dirt, or debris. This will prevent build-up and keep the blades in good condition.
  2. Blade Sharpening: Check the sharpness of the blades regularly. Dull blades can result in uneven cuts and put additional strain on the mower. If the blades are dull, sharpen them using a sharpening tool or take them to a professional for sharpening.
  3. Balancing: Properly balance the blades before installing them on the mower. Balanced blades ensure smooth operation and consistent cuts. If you notice any imbalance during use, readjust and rebalance the blades.
  4. Inspection: Regularly inspect the blades for any signs of damage, such as bends, cracks, or excessive wear. If you notice any damage, replace the blades immediately to maintain optimal performance.
  5. Lubrication: Apply lubricant to the blade connections and moving parts to reduce friction and ensure smooth movement. This will help prevent rust and corrosion.
  6. Storage: Store the blades in a dry and secure place when unused. Avoid exposing them to moisture or extreme temperatures, which can damage the blades.
  7. Follow Manufacturer’s Guidelines: Always refer to the manufacturer’s guidelines and instructions for proper maintenance procedures for your Meg-Mo blades. They may provide additional tips and recommendations for optimal maintenance.


Meg-mo blades prices

Meg-Mo blades prices vary depending on the specific model and type of blades. On average, Meg-Mo blades range from $50 to $100 per blade. However, prices can go higher for specialized or customized blades. Check with authorized dealers or manufacturers for the most accurate and up-to-date pricing information.

Where to buy meg-mo blades?

Meg-Mo blades can be purchased from authorized dealers or the manufacturer’s website. Authorized dealers can be found through the Meg-Mo website or by contacting their customer service. Additionally, the manufacturer’s website offers the option to purchase blades online, ensuring a convenient and reliable source for obtaining Meg-Mo blades.

What would cause mower blades not to engage?

If your mower is running on twisted belts or loose ones, the mower blades may not engage. When loose, the belt length increases and does not spin parts properly. Also, check if your spindle is fully functional.

What causes lawn mower blades to split on the ends?

Mowing wet grass can also split grass if it has clumped blades when mowing it. Dull lawn mower blade problems arise when cutting wet grass.

What are the toughest mower blades?

The E-6 is the thickest wide-cut blade from United States Mower Blades. The E6 blade is 3-inches in width and 0.250-inches in thickness. This heavy duty blade is easy to maneuver. E6 Blade is a blade for industrial applications offering unparalleled durability and long life.

Final Thoughts on meg-mo rotary mulching blades

Manufacturers of Meg-Mo blades use harder steel compared to others. Their design is also stylish and futuristic, eyeing to replace the existing cutting technology.

Meg-Mo blades go through the laboratory for inspection and quality tests, but that does not eliminate all the challenges of using these blades on different mowers.

If you have a tractor suited for the Meg-Mo system, we highly recommend these blades.

However, if you are required to replace or upgrade parts, then that is not a fair deal on your end if you’re keen on getting value for your money.